Before you finish off that basement home theater or family room, take into account the noise factor. No, not the noise of that action movie or the kids playing up a storm. The noise coming from upstairs.
Overhead noise can disrupt the comfortable atmosphere or good listening environment you’re trying to create. Here’s how you can cut it down.
Eliminate floor creaks. Now’s as good a time as any to tackle this problem, as you may need to add cleats or other bracing to stop floorboards or subfloors from moving and squeaking.
Sound travels most easily through air, so if there are actual open gaps between the main floor and the basement, you need to seal them. Caulk small gaps or spray insulation into larger areas, paying attention to holes where pipes and ducting come through.
Next, install fiberglass insulation between the joists. Don’t pack it too tightly; leave it loose and it will do a better job.
You may want to consider soundproofing batts, but the extra cost isn’t always worth the added benefit. They’ll give you some extra soundproofing, but the difference is not major.
You may also want to add a carpet on the main floor, which will help absorb sound from the upper rooms.
This work will cut out most of the higher notes from upstairs, but you’ll still hear low notes that reverberate through your home’s structure.
A drop ceiling will help to isolate the basement room from these vibrations. Ideally, install resilient bars designed for drywall, and hang two layers of drywall to this.
Now you can enjoy your movie in comfort. And if you can’t hear your spouse reminding you of some chores, you have a good excuse.